How to unbrick realme 3 pro? softbrick, Hard Brick solution, bootloader locked

While you are trying to install some custom ROM on your realme 3 pro device, Then, You may find a problem of lost boot.img and recovery.img. when It happens there are two conditions of bricking your realme 3 pro devices. 

1. You can access your fast boot mode or recovery mode by pressing volume down and power button for fast boot. Or volume up and power button for recovery. Anyone method of them, If you are able to access then you can easily unbrick your phone. 

2. But in the second case, It happens when you have installed a custom ROM or recovery one your system. and after that, You are going to lock your bootloader without uninstalling your custom recovery or ROM. 

It will lock your device and lost boot.img and recovery.img.
Now! The serious problem has started from here. Now you can not boot into fast boot mode or recovery mode. Because, You have locked your bootloader. 

You think to visit on the internet and start watching thousands of tutorials to find a proper solution for it.  But you fail to find a proper solution for. 

But don't worry, I'm bringing you the solution for both conditions.Either You can access fast boot mode or you can't. 

1. Solution for first method.

 In this condition, You need to follow some steps and you can unbrick your device easiuy. 

Required files for this operation: 

Realme 3 pro USB driver  Click here to download

Platform tool for realme 3 pro click here to download

 Recovery.img for realme 3 pro click here to download

now let's start process for unbricking your realme 3 pro. 

. Turn off your device
1. Hold the volume key
-down + power to device
-go to fastboot
2. Plug the device into a PC / Laptop
3.. Download recovery.img (https://drive.google.com/file/d/1z8M...p2Xr_O7gR/view)
Move the recovery file that you have downloaded into the folder platform-tools
4. Inside the folder, Shift + Right-click then select open command window here (Windows 7) or open Windows Powershell (10)
6..
a. type fastboot flash recovery.img (Windows 7)
b.
type ./fastboot flash recovery.img (Windows 10)
7. After getting OKAY written, Continue to install VBMETA (see attachment)
8. Move the vbmeta.img file into the platform-tools folder
9. Return to Windows Powershell /Command prompt then type fastboot - disabled-verity - vbmeta flash-verification-enabled vbmeta.img (Windows 7)
./fastboot - disabled-verity - vbmeta flash-verification-enabled vbmeta.img (Windows 10)
10. Press the volume button to Recovery then press power to confirm
11. After entering Recovery, make sure the device is still plugged in,the select wipe then FORMAT DATA, type yes, then tap back and reboot to recovery.
12. After returning to recovery, copy Charlie Decryption by Nitish (see attachment) to your device through computer
13. Flash fix and VOILA! you successfully installed TWRP on your device

Comment if you need help.

Check another post for second method.